Commercial Rolling doors

Designed to reduce impact damage by being more flexible. This design reduces garage door maintenance and repair costs.

• Powder-coated breakaway bottom bar in safety yellow attached to a flexible curtain that releases from guides upon accidental impact.
• Galvanized steel guides [MR6830 - 3-1/2" 11 gauge] or powder-coated [MR6850 - 5" heavy-duty painted steel].
• Manual operation with chain hoist (included) and gear head (optional)
• Simple, efficient design, with no hinges or cables, provides reliable, long-lasting performance.
• Maximum width: 18' | Maximum height: 18

Available in a variety of insulations, is built with quality materials. This ensures durability and strength for many years of use.

• Curtain is 24, 22, 20 or 18-gauge galvanized steel
• Manual operation with included chain hoist or optional electric operation using Jackshaft type garage door
• Maximum width: 30' | Maximum height: 24'
• Insulation values: polystyrene (R‑4.7) or polyurethane (R‑6.7 or R‑7.2)

Constructed of heavy-duty steel or aluminum, they are built to last for years and offer the ultimate in safety and aesthetics.

• Curtain is 16‑gauge aluminum or 22‑gauge stainless or galvanized steel
• Flat slats (1‑1/2" high x ½" deep)
• Manual operation (included) or a Wall Mounted motor (optional)
• Maximum width: 14'4" | Maximum height: 8'4"

Easy to use and cost-effective. It meets the highest standards of fire protection. It uses space-saving designs along with user-friendly operation.

• Fire resistant: 45‑minutes, 90‑minutes and 3 hours (UL listed)
• 22 gauge galvanized steel
• Flat slats (1 ½" high)
• Manual operation
• Maximum width: 13'0" | Maximum height: 8'4"

Protect your buildings, warehouses or anything else from break-ins, Cornell's EntryDefender steel door will keep your belongings safe.

• The EntryDefender door can protect sensitive structures from forced entry for 5, 15 & 60 minutes.
• Galvanized steel: 12‑gauge
• Operates up to 20,000 cycles.
• Hood: galvanized steel with powder coat
• Manually engaged lock is bolted to the bracket and concealed at the head of the coil.
• SG Motor Operator is standard listed with chain and sprocket drive. Includes an interlock to prevent operation while locks are engaged.

It is a high-performance roll-up door capable of up to 1 million cycles, making it a top performer despite the most frequent openings.

• Available door sizes: up to 20’ high by, 30’ wide
• Galvanized steel: 18 or 22‑gauge
• Stainless Steel Slats : 20 gauge
• Perform for more than 1,000,000 cycles.
• Speed operation: up to 24"/sec.
• Hood: galvanized steel with powder coat
• CycleShield finish is a baked-on polyester powder coating.

Cornell's fire-rated roll-up door is the door that saves lives. Their advanced system is designed to close automatically in the event of smoke or flames.

• Available door sizes: up to 12’ high by, 13.5” wide (standard) & up to 40’ high by, 60’ wide (oversized)
• Galvanized steel: 18, 20 or 22‑gauge
• 20‑gauge 300 Series Stainless Steel in #4 finish
• Hot-dip galvanizing on steel components
• Zinc-enriched, corrosion-resistant powder coating in Gray
• Alarm-activated AlarmGard® and a variety of motor options: Fusible-link-activated chain, crank or motor

Choose the door that meets your expectations with flexibility, performance, reliability, security, durability, and maximum clearance.

• Door sizes: up to 30' x 30'
• Performance: 20 cycles / day or 50,000 cycles for the lifetime of the door
• Flat slate gauge: 18, 20, 22 or 24
• Curtain: galvanized steel with Galvanex polyester enamel finish in Gray, Tan, White and Brown

This garage door can resist common tools and protect valuable possessions for commercial or residential protection.

• Curtains are 18‑gauge galvanized steel with GalvaNex™ polyester enamel finish in Gray, Tan, White or Brown.
• Two hybrid cylinder locks with manually thrown slide bolts via a thumb turn-on.
• 6" tall aluminum bottom bar in mill or powder-coated finish.
• Tested to more than 4500 lbs. of effort to lift 3” (the door used was 14’1” X 10’).

A high-performance rolling door with an intelligent control panel. Cornell Extreme® 300 Series High Speed door built to maximize uptime and improve productivity.

• Available door sizes: up to 20’ high, 30’ wide
• Speed operation: up to 24"/sec.
• Maintenance-free: 300,000 cycles
• Motor: compact, direct drive operator with no rollers or sprockets
• Curtain: galvanized steel
• Apex™ SmartController (NEMA 4X) is a plug-and-play connection to the operator and standard sensors to reduce installation time with an LCD screen that provides instructions and errors.

It's designed for exterior use and can maintain different temperatures on each side; it works perfectly for an environment that requires climate control, security and durability.

• Slats are available in galvanized steel, stainless steel or aluminum
• 18, 22 & 24 Gauge
• Curtain: galvanized steel with Galvanex polyester enamel finish in Gray, Tan, White and Brown
• Materials and finishes: Slats are filled with 7/8" thick closed cell pressure foamed-in-place urethane insulation, R‑value of 8.0
• Performance: 20 cycles/day or 50,000 cycles for the lifetime of the door

This door is insulated for a lower energy consumption ratio. It is suitable for exterior doors and reduces air infiltration.

• Slats are available in galvanized steel, stainless steel or aluminum
• 18, 22 & 24 Gauge:
• Curtain: galvanized steel with Galvanex polyester enamel finish in Gray, Tan, White and Brown
• Materials and finishes: Slats are filled with 7/8" thick closed cell pressure foamed-in-place urethane insulation, R‑value of 8.0
• Performance: 20 cycles/day or 50,000 cycles for the lifetime of the door

This high-efficiency door system is ideal for environments where rapid door operation is needed in areas with traffic. Its springless drive system minimizes maintenance.

• Heavy-duty high-performance rubber door designs
• Springless drive system to reduce maintenance.
• Sizes: up to 30' wide x 30' high
• NEWGEN Guide and Curtain Loks
• Wind load: 20 psf or 88 mph
• Chain drive operator or Chain hoist

It’s designed for tight spaces, fitting a ceiling space of just 20". A high-performance, high-speed rubber door.

• Heavy duty rubber door designs
• Sizes: up to 17' wide x 25' high
• NEWGEN Guide and Curtain Loks
• Wind load: 20 psf or 88 mph
• Direct drive operator
• Chain hoist

This garage door Model is ideal for warehouses or maintenance garages and is highly resistant to the harshest climates with its full, heavy-duty rubber door.

• Heavy-duty rubber door designs
• Sizes: up to 30' wide x 30' high
• Wind load: 20 psf or 88 mph
• Direct drive operator
• Chain hoist

Perfect for use in transit areas such as airports, train stations, and bus stations. It is particularly suitable for maintenance areas.

• Heavy duty rubber door designs
• Sizes: up to 22' wide x 25' high
• Wind load: 20 psf or 88 mph
• Direct drive operator
• Chain hoist

Ideal for a hash environment where the frequency is low, and its manual-operation door makes it a low-cost value.

• Manually opened door.
• Springless drive system to reduce maintenance.
• Sizes: up to 15' wide x 15' high
• Wind load: 20 psf or 88 mph
• Chain hoist

This is one of the most reliable doors, perfectly adapted for an industrial environment. It's an economy Model that gets the job done.

• Springless drive system to reduce maintenance.
• Sizes: up to 30' wide x 30' high
• Opening speed: up to 18 inches per second
• Wind load: 20 psf or 88 mph
• Chain drive operator & chain hoist
• 50,000 cycles

The revolutionary Ranger™ 9000 L or LH steel rolling door is a high-performance Model. Its springless design prevents frequent breakage and makes it extremely strong.

• Build with a polyurethane core covered with a triple-layered skin.
• Sizes: up to 21' wide x 14' high
• 29-gauge steel slats
• Operating speed: up to 20” per second
• 500,000 cycles
• Compact, self-monitoring direct-drive motor

This commercial garage door is a versatile, durable and easy-to-use quality choice. It's designed with hot-dipped galvanized steel and several types of locks for all your needs.

• Sizes: up to 16' wide x 16' high
• Max 26‑gauge steel
• Manual operation
• Bottom bar: extruded aluminum
• 12‑Month Limited Warranty on all product parts and components

Designed to rest on a countertop, This door is the perfect solution for small openings or areas requiring visual appealing access.

• Sizes: up to 20' wide x 7' high
• Standard: flat-face slat, extruded aluminum
• 2" flat-faced slat: #17, up to 22‑gauge steel or 16‑ga. aluminum
• Secur-Vent Slat profile: 22‑ga. steel or stainless steel
• Manual lift operation

Designed to be highly resistant and aesthetically pleasing with its variety of colours. It can be installed on almost any structure.

• Solidly constructed, attractive and easy on budget.
• Sizes: up to 16' wide x 16' high
• Max 26‑gauge steel
• Wide colour selection(14 choices)
• Manual operation
• Bottom bar: extruded aluminum reinforced with steel.

Built for tough environments, it offers flexible constructions and a variety of colours, making it suitable for a variety of applications.

• Sizes: up to 40' wide x 42' high
• Flat slat gauge: 16‑gauge
• Construction: Steel, Aluminum or Stainless steel
• Slats: heavy-duty 3" flat or curved
• Colours: Grey, Beige, White, Brown
• Manual push-up, unless size requires chain hoist.