Pro-Dock docking equipment

It's built from pieces of industrial-grade polyurethane, compressed to 27 pounds, mounted on 2-inch-thick dry wood planks.

• All installation hardware is made of galvanized steel and included.
• To prevent pinching between the truck and the bumpers, the lower part of the sides is cut at an angle.
• This sealing pad (Pro-Dock model MM-100) insulates trucks measuring between 12 and 13 feet from the ground.
• The side panels are fitted with yellow strips measuring 4 inches wide by 30 inches high.
• Each pad has ventilation holes at the bottom.

Made in one piece, this door seal features a series of internal separators to improve air circulation and form a flat surface against the back of the truck.

• The lower parts of the door seal have ventilation holes to evacuate moisture.
• This waterproofing pad (Pro-Dock model MM-150) insulates trucks measuring between 12 and 13 feet 4 inches from the ground.
• All installation hardware included is made of galvanized steel. Three dry wood beams are also included.
• Each door seal comes with a motor with ⅒ hp of power, 120V of voltage, 3.25 amps of current and an airflow of 495 cubic feet per minute.

This model fits 8' x 10' doors and is ideal for receiving trucks of different heights. It is constructed from pieces of industrial-grade polyurethane mounted on 2-inch-thick dry wood planks.

• This adjustable curtain door seal (Pro-Dock model MM-200) provides insulation for trucks measuring between 11 feet 6 inches and 13 feet 6 inches from the ground.
• To prevent pinching between the truck and the bumpers, the lower part of the sides is cut at an angle.
• All installation hardware is made of galvanized steel and included.
• Each door seal has ventilation holes at the bottom.
• The side panels are equipped with yellow strips measuring 4 inches wide by 30 inches high.
• A series of pulleys, slides and ropes provide complete control of the adjustable curtain. A fiberglass rod added to the base of the curtain gives it extra rigidity.

Made from polyurethane and dry wood, it is covered with a translucent, UV-resistant and flame-retardant plastic, with a thickness of 0.055 gauge.

• Features a roller that automatically retracts upward when the self-adjusting head is deactivated.
• Each seal comes with a ½ hp motor, 120V voltage, 3.25 amps current and an airflow of 495 cubic feet per minute.
• All installation hardware is galvanized steel and included.
• The side panels are equipped with yellow strips measuring 4 inches wide by 30 inches high.
• Each door seal has ventilation holes at the bottom.
• This door seal with inflatable head and compressible sides (Pro-Dock model MM-325) provides insulation for trucks measuring between 10 feet 6 inches and 14 feet off the ground.

Made with 2 vertical sides and an automatically adjustable head, this door seal features internal dividers to improve air circulation and form a flat surface against the back of the truck. Elastic cords return it to the wall when deflated.

• This door seal with adjustable inflatable head and inflatable sides (Pro-Dock model MM-350) provides insulation for trucks measuring between 10 feet 6 inches and 14 feet off the ground.
• Features a roller that automatically retracts upwards when the self-adjusting head is deactivated.
• The roof includes two galvanized steel side supports and a wooden housing. It is covered with a translucent, UV-resistant and flame-retardant plastic, with a thickness of 0.055 gauge.
• Each door seal comes with a ½ hp motor, 120V voltage, 8.6/4.3 amps current and 1210 cubic feet per minute airflow.
• All installation hardware is made of galvanized steel and is included.

The head curtain and side flaps are reinforced to help them reposition normally. Four protective plates are attached to each end of the head curtain.

• On the impact surface, 14-inch yellow strips are placed on each side.
• This stationary shelter (Pro-Dock model MM-400) provides insulation for trucks measuring between 11 feet 6 inches and 13 feet 6 inches from the ground.
• The head and sides are made of wood and covered with a translucent, UV-resistant, fire-retardant plastic, 0.055 gauge thick.
• All installation hardware is made of galvanized steel and included.

Made with 2 vertical sides and an automatically-adjustable head, this door seal features internal dividers for better air circulation and to surround the truck on each side.

• • This stationary shelter (Pro-Dock model MM-400) provides insulation for trucks measuring between 10 feet 6 inches and 14 feet off the ground.
• All installation hardware is galvanized steel and included. Protective brackets are also included.
• Features a roller that automatically retracts upward when the self-adjusting head is deactivated.
• Each door seal comes with a ½ hp motor, 120V voltage, 8.6/4.3 amps current and 1210 cubic feet per minute airflow.
• The roof is made of a single piece of dry wood. It is covered with a translucent, UV-resistant and flame-retardant plastic, with a thickness of 0.055 gauge.

Made with 2 vertical CURVED sides and an automatically adjustable head, this door seal features dividers to improve air circulation and surround the truck on both sides.

• All installation hardware is galvanized steel and included.
• This inflatable, retractable shelter (Pro-Dock model MM-550) provides insulation for trucks measuring between 10 feet 6 inches and 14 feet off the ground.
• Each door seal comes with a ½ hp motor, 120V voltage, 8.6 amps of current and an airflow of 1210 cubic feet per minute.
• The roof is made of two 2" x 8" planks.
• Features a roller that automatically retracts upwards when the self-adjusting head is deactivated.

The door seal is made of high-density polyurethane, helping it retain its L-shape. A set of pulleys and ropes controls the adjustable curtain. Fiberglass rods add rigidity to the curtain.

• This special "L"-shaped door seal (Pro- Dock models MM-709 and MM-710) provides insulation for trucks measuring between 12 and 13 feet 6 inches from the ground.
• The side panels are fitted with yellow strips measuring 4 inches wide by 30 inches high.
• The lower parts of the door seal have ventilation holes to evacuate moisture.
• All installation hardware is galvanized steel and included.

Easy to use and perfectly safe, Pro- Dock's hydraulic dock levellers feature a central support for three-wheel forklifts. Made from solid bars, this design ensures high structural integrity while retaining lateral flexibility.

• This system includes a main cylinder, a double-action cylinder on the tailgate, a 1 hp pump-motor unit, a control box and a safety switch.
• Standard sizes are 6 or 7 feet wide by 6, 8, 10 or 12 feet long, and one foot working height.
• Dynamic (not static) load capacity from 30,000 lbs to 120,000 lbs
• Comes with the following standard equipment: a toe-guard (on the work area), a safety post (for maintenance) and a 16" tailgate (18" for capacities of 60,000 lbs and over).
• A range of optional equipment is available on request

The mechanical dock levelers feature a central support for three-wheel forklifts. Manufactured from solid bars, this design ensures high structural integrity while retaining lateral flexibility.

• Dynamic (not static) load capacity of 30,000 to 50,000 lbs.
• Comes with the following standard equipment: a toe-guard (on the work area) and a 16-inch tailgate (18 inches for capacities of 60,000 lbs and over)
• Standard sizes are 6 or 7 feet wide by 6, 8, 10 or 12 feet long, and one foot working height.
• Optional equipment is available on request

Pro-Dock's wall-mounted dock levellers are the best solution to lack of interior space or constraints under concrete floors.

• Comes with the following standard equipment: laminated bumpers providing a total extension of 27 inches from their attachment point
• Dynamic (not static) load capacity of 30,000 lbs.
• Standard sizes are 66 inches, 72 inches or 84 inches wide, and 5 inches high for working.

Pro-Quai offers a wide selection of high-quality products for unloading docks and their surroundings.

• From dock lights to wheel chocks and door bumpers (laminated or molded), Pro-Dock offers everything you need for loading docks.
• Safety gates and PVC strip doors are also available.

This attachment system holds trailers in place by connecting to trucks' rear impact bar. When the trailer is backed up, the adjustable spring-loaded carriage is lowered by the force exerted by the impact bar.

• The trolley is made of 5⁄16" steel to withstand the impact of trucks as it backs up to hook.
• The hook is activated with a button on the control box inside the building.
• Each hook comes with a motor of ⅒ hp power, 120V voltage, a gearbox and a brake.
• Overload protection is installed on the motor and it is secured under a steel cover.
• Red and green 4" LED lights are installed on the exterior as traffic lights.
• Signage can be added in English or French for optimum safety.