Doorlec commercial garage door operators

The EHJ electric jackshaft operator is ideal for commercial and industrial doors fitted with a head shaft. It is suitable for overhead or vertical sectional doors, as well as metal roll-up doors.

• The EHJ is wall-mounted on either side (left or right)
• Speed is approximately one foot per second, or about 0.3 meters per second
• Model EHJ lasts an average of 10 million cycles
• Available with ⅓ HP to 1 HP, single-phase or three-phase motor and is equipped with high-performance solenoid brake

The three-button control station allows you to raise, lower and stop the door momentarily, thus enabling the door to be stopped and restarted regardless of its position (raising or lowering).

• Speed is approximately one foot per second, or about 0.3 meters per second
• ET-3 is ceiling-mounted
• ET-3 lasts an average of 10 million cycles
• Available with single-phase or three-phase motors
• A safety lever is included to allow manual opening of the door in the event of a power failure

The ETB-3 shares many of the same features as the ET-3, except for the brakes. The ETB-3 has solenoid brakes which prevent the door from slipping, allowing the door to stay in place.

• Available with single-phase or three-phase motor and is equipped with high-performance solenoid brake
• A safety lever is included to allow manual opening of the door in the event of a power failure
• ETB-3 is ceiling-mounted
• ETB-3 lasts an average of 10 million cycles
• Speed is approximately one foot per second, or about 0.3 meters per second

Model ETBH features an automatic, adjustable friction clutch that protects both the door and the unit in the event of an obstacle.

• ETBH is ceiling-mounted
• ETBH lasts an average of 10 million cycles
• Available with single-phase or three-phase motor and is equipped with high-performance solenoid brake
• Speed is approximately one foot per second, or about 0.3 meters per second
• A safety lever is included to allow manual opening of the door in the event of a power failure

ETBX model is designed for hazardous environments with risk of explosion. It is specially adapted for operating sectional overhead doors in confined spaces.

• Available with single-phase or three-phase motor and is equipped with a drum brake that stops the motor as soon as the power supply to the electric solenoid is cut off
• A safety lever is included to allow manual opening of the door in the event of a power failure
• ETBX is ceiling-mounted, making it ideal for small spaces
• ETBX lasts an average of 10 million cycles
• Speed is approximately one foot per second, or about 0.3 meters per second

This model features momentary controls for raising, lowering and stopping the door. It can be started and stopped from any position. Its automatic friction clutch protects the entire system in the event of blockage.

• Speed is approximately one foot per second, or about 0.3 meters per second
• ETH lasts an average of 10 million cycles
• Available with ⅓ HP to 1 HP, single-phase or three-phase motor
• ETH is ceiling-mounted

Model LJ is suitable for a variety of overhead doors, as well as service doors and rolling grilles. It can be used for all types of doors fitted with a shaft as the main driving element.

• Available with ⅓ HP to 1 HP, single-phase or three-phase motor and is equipped with self-adjusting solenoid brake
• Speed is approximately 1.4 feet per second, or about 0.3 meters per second
• Model LJ lasts an average of 10 million cycles
• LJ installation is universal, regardless of side (left or right)

The LJH model shares essentially the same features as the LJ model, except for a manual “chain hoist” enabling the door to be operated from the ground in the event of a power failure.

• Model LJH lasts an average of 10 million cycles
• Available with ⅓ HP to 1 HP, single-phase or three-phase motor and is equipped with self-adjusting solenoid brake
• LJH installation is universal, regardless of side (left or right)
• Speed is approximately 1.4 feet per second, or about 0.3 meters per second

The model ETBHW electric door control system is designed for industrial rising doors, resistant to dust, water and liquids, ideal for wet environments such as laundry areas. It comes with the LJHW operator.

• Available with ⅓ HP to 1 HP, single-phase or three-phase motor and is equipped with high-performance solenoid brake
• Speed is approximately one foot per second, or about 0.3 meters per second
• Model LJHW lasts an average of 10 million cycles
• The LJHW is wall-mounted on either side (left or right)